Call 08048619804 61% Response Rate

Send Email

Fosroc Nitobond SBR Latex Bonding Agent

Pioneers in the industry, we offer fosroc nitobond sbr latex bonding agent from India.
Fosroc Nitobond SBR Latex Bonding Agent
  • Fosroc Nitobond SBR Latex Bonding Agent
  • Fosroc Nitobond SBR Latex Bonding Agent

Fosroc Nitobond SBR Latex Bonding Agent

Product Price: Rs 185 / LitreGet Best Price

Minimum Order Quantity: 100 Litre

Product Brochure

Product Details:
Packaging Size20 Kg
Packaging TypeBucket
Model NumberNitobond SBR Latex
Fosroc Nitobond SBR Latex Bonding Agent is modifi ed styrene butadiene emulsion specially designed for use as a bonding aid and gauging liquid for cementitious systems. It is resistant to hydrolysis and can therefore be used for external applications too.

Main Uses:
  • Modifying and improving bonding of floor toppings, renderings and mortars.
  • Repair of worn, damaged and spalled concrete.
  • Repair of large cracks.
  • Polymer modified floor screeds.
  • Waterproof plasters for masonry and slurries.
  • For modifying and improving bonding of fl oor toppings, renderings and mortars; repair of worn, damaged and spalled concrete, repair of large cracks; polymer modifi ed fl oor screeds; waterproof plasters for masonary and slurries. 

  • Simple to use - Single component, gauged as required.
  • High - Provides excellent bond to concrete, adhesion plaster, masonry, stone work, etc.
  • Improves -Gives weather resistant mortar with improved durability impermeability to chlorides and other harmful agents.
  • Reduces - Provides waterproof screeds, plasters and Permeability slurries.
  • Increases - Improved tensile and flexural properties strength allow thin applications.
  • Versatile - Compatible with all common hydraulic cements.

Technical Support
  • Fosroc provides a technical advisory service supported by a team of specialists in the field.

Chemical Resistance:
  • Cementitious materials have limited chemical resitance. The addition of Nitobond SBR (Latex) to cement mortars reduces permeability and therefore helps reduce the rate of attack by aggressive chemicals.

Surface Preparation
  • The object of the surface preparation is to achieve a clean sound surface with a good mechanical key. All substrates should be cleaned and free of dust, plaster, oil, paint, grease, corrosion deposits, and any other deleterious substances.
  • Laitence should be removed by mechanical means. Smooth substrates must be mechanically roughened e.g. by scabbling, needle gun or grit blasting to provide an adequate key.
  • Corroded reinforcing steel should be exposed around its full circumference and cleaned to remove all loose scale and corrosion deposits. It is always preferably to clean the steel to a bright condition. Use of emery cloth, grit or sand blasting is recommended.

  • Reinforcing steel must be primed with Nitozinc Primer immediately after cleaning. The concrete substrate should be thoroughly dampened with water and any excess removed before being primed by thoroughly scrubbing in a slurry coat of 1 volume  Nitbond SBR (Latex) to 1 volume water to 3 volumes fresh cement.
  • In order to obtain a smooth consistency the cement should be  blended slowly into the liquids. Stir frequently during use to off set settlement.
  • Avoid ‘puddling’ of the slurry coat. The topping must be applied on to the wet slurry. If the slurry dries out it must be removed and the clean substrate reprimed

Additional Guidance:
  • Prepare surfaces thoroughly. Toe-in at edges wherever possible to avoid feather edging. All surfaces including edges must be primed. All applications should be wet on wet, the primer must not be allowed to dry.
  • The level of added water in the mix designs may need adjusting to achieve the required consistency. In general water content should be kept to the minimum necessary.
  • For consistent performance the use of clean, dry sand is recommended. Where wet sand is used, reduce the added water level as appropriate.
  • Health & Safety instructions Nitobond SBR (Latex) should not come in contact with skin and eyes or be swallowed. 

Get Best QuoteRequest A Callback


Contact Us
Thank youYour Enquiry has been sent successfully.
© Punjab Traders. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.