EXPLORE MORE CATEGORIES
- Home
- ยป
- Products & Services
- »
- Ready Mix Plaster
Ready Mix Plaster
Leading Wholesale Trader of fosguard renderoc ready plaster, ultratech readiplast ready mix plaster and birla aerocon ready mix plaster from New Delhi.
Fosguard Renderoc Ready Plaster
Product Price: Rs 360 / BagGet Best Price
Minimum Order Quantity: 20 Bag
Product Brochure
Product Details:
| Packaging type | Bag |
| Packaging Size | 40 kg |
| Usage/Application | Construction |
| Brand | Fosguard |
| Color | Grey |
| State/Form | Powder |
| Compressive Strength | 6 n/mm2 |
| Dry Adhesion to Substrate | 0.3 n/mm2 |
| Pot Life | 30 min |
| Model Name | Renderoc Ready Plaster |
| Country of Origin | Made in India |
Main Uses:
- All blocks masonry works.
- Brick and stone masonry works.
- Concrete surfaces.
- For external (Rendering) and internal (Plastering) use on walls, ceilings, columns and partitions.
- Renderoc Ready Plaster is ready to use cement mortar based on inorganic binders for external (rendering) and internal (plastering) use on walls, ceilings, columns and partitions.
Advantages
- Ready to use, only addition of water is required at site.
- Non-sagging for higher thickness applications.
- Better adhesion to substrate.
- Reduced shrinkage cracks.
- Reduced water absorption hence enhanced durability.
- Negligible wastage due to least rebound losses.
- Uniform and smooth finish to walls.
Technical support:
- An experienced technical advisory team is available to give technical service on request.
Note:
- The typical physical properties given above are derived from testing in a controlled laboratory environment. Results derived from testing fi eld-applied samples may vary, dependent on actual site conditions
- Pre Packed Cement Based Ready to use Plaster
Specifi Cation Clause:
- The Renderoc Ready Plaster shall be a prepacked material requiring only water addition at site. The product shall comply with IS 1661.The product shall have compressive strength > 6 MPa and bond strength 0.3 MPa.
Surface Preparation:
- The substrate should be free of dust, loose particles, oil, grease, paint, and other such contamination which may aff ect the bonding. Cleaning can be carried out by suitable methods like wire brush, water jetting, mopping etc. If the surface is porous and absorbent substrate, it should be moistened with potable water.
Mixing:
- For best results a mechanically powered mixer should be used to achieve a good consistency. The selected water content should be accurately measured and poured into the mixer. The total content of the bag should be slowly added and continuous mixing should take place for 5 minutes. Re-mix again about 2 mins before application.
Application:
- Apply the mixed plaster uniformly on the substrate using a steel trowel.
- The plaster can then be levelled to a desired fi nish using masonry tools like straight edge and masonry bob. Diff erent fi nish can be achieved using steel trowel, wooden fl oat or sponge as per fi nish required.
- If 2nd coat is required, ensure the fi rst coat shall be roughened to provide good grip for 2nd coat. Saturate the 1st coat prior to the application.
- To avoid undulations on plastered surface, apply mortar patch before the wall is plastered on perimeter of wall for levelling.
Curing:
- On completion of plastering, the plastered areas should be thoroughly cured. Curing shall be followed as per standard construction practices
- Curing can be started after 24 hrs by light sprinkling of water 2 to 3 times a day till 5 to 7 days or by application of curing compound.
Get Best QuoteRequest A Callback
UltraTech Readiplast Ready Mix Plaster
Product Price: Rs 295 / BagGet Best Price
Minimum Order Quantity: 20 Bag
Product Brochure
Product Details:
| Packaging type | Bag |
| Packaging Size | 40 kg |
| Maximum Applicable Thickness Per Layer | 10 mm |
| Usage/Application | Construction |
| Brand | UltraTech |
| Flexural Strength | 1.8 Mpa |
| Coverage Area | 20 Square Feet |
| Compressive Strength | 13.46 n/mm |
| Country of Origin | Made in India |
UltraTech Readiplast Ready Mix Plaster is rendered with a high quality polymer additives. It can be used on inner and outer walls.It can be used on brick, AAC blocks, stone walls as well as concrete surfaces.It is water resistant with high quality and sustainability.
Features:
- Superior Quality
- Ready to Use
- Saves Time and Labour
- Less Curing
Get Best QuoteRequest A Callback
Birla Aerocon Ready Mix Plaster
Product Price: Rs 260 / BagGet Best Price
Minimum Order Quantity: 20 Bag
Product Brochure
Product Details:
| Packaging type | Bag |
| Packaging Size | 40kg |
| Usage/Application | Construction |
| Brand | Birla Aerocon |
| Water Retentivity | 95% |
| Flexural Strength | 1.8 Mpa |
| Setting Time Initial | 100 min |
| Setting Time Final | 180 min |
| Water Demand | 25 % max |
| Compression Strength | 6/mm |
| Pull Off Adhesion | 0.3 Mpa |
| Country of Origin | Made in India |
Manufactured at a state-of-the-art plant, Birla Aerocon Ready Mix Plaster is a blend of portland cement, fine graded sand and water soluble, high quality polymer additives, in the right proportions. It is ready to use by simply mixing water at the site and can be easily applied on brick, block and concrete surfaces.
Key Features
- Compact Plaster To Effectively Reduce Void Gaps
- Highly Durable
- Excellent Workability
- Superior Finish
- A variety Of Substrates
- Graded Sand With No Silt Content
Key Benefits:
- Reduces Costs: Birla Aerocon Ready Mix Plaster with its greater compactness and inherent strength ensures substantial reduction in repairs and maintenance costs,while also enhancing life of the paint.
- Saves Time: With its matchless features and properties, Birla Aerocon Ready Mix Plaster sets faster and requires less mixing time. This means that the construction gets comepleted quickly to meet scheduled timelines.
- Saves Water: Water consumption during construction is less as compared to traditional plaster.
- Excellent Workabilty: It is a ready to use plaster with smart finish.
Get Best QuoteRequest A Callback