EXPLORE MORE CATEGORIES
- Home
- ยป
- Products & Services
- »
- Tile Adhesive
Tile Adhesive
Wholesale Trader of a wide range of products which include fosguard nitotile mpa tile adhesive, fosguard granite and marble tile adhesive, fosgaurd nitotile gpx high performance tile adhesives, fosguard nitotile gp floor tile adhesive, myk laticrete 325 tile adhesive and myk laticrete 335 tile adhesive.
Fosguard Nitotile MPA Tile Adhesive
Product Price: Rs 720 / BagGet Best Price
Minimum Order Quantity: 2 Bag
Product Brochure
Product Details:
| Packaging Size | 20 Kg |
| Model Number | Nitotile MPA |
| Packaging Type | Bag |
| Surface Of Application | Tiles |
| Form | Powder |
| Grade Standard | Industrial |
| Material Compatibility | Ceramic |
| Open Time | 30 min |
| Tensile Adhesion Strength | 1.5 N/mm2 |
| Bed Thickness | 12mm |
| Product Brand | Fosguard |
| Mixed Density | 1.90 gm/cc |
| Pot Life | 120 min |
- Tile on tile.
- Glass mosaic tile fixing.
- Vitrified tiles fixing.
- Tiles in swimming pools.
- Nitotile MPA Grey/White is high performance, polymer modifi ed adhesive and it is suitable for Tile on Tile, glass mosaic tiles and stone tiles subjected to damp and tropical conditions. It is suitable for fixing wall and floor tile/stone in interior and exterior situations upto 6mm bed thickness (can be extended up to 12 m in area of limited extent).
Advantages
- Excellent Grab.
- Excellent slip resistance.
- High bond strength.
- Conforms to IS 15477 Type IV.
- Excellent Grasp: Suitable for tile format both S1 and S2
- Easy mixing, smooth application & spread
- Better workability
- Excellent slip resistance
- High bond strength
Areas of Application:
- Walls & Floors
- Interiors & Exteriors
- Wet areas
- Showers
- Swimming Pools
- Dry areas
- Granite and Marble Tile Adhesive
- Fixing granite, marble and stone tiles for both interior and exterior applications
Suitable Substrates:
- Brick Work / Concrete
- Cement Sand Screed
- Cement Sand Rendering
- Unglazed Tiles
- Hard Natural Stone
- Glazed Tiles and tile on tile
Note:
- The typical physical properties given above are derived from testing in a controlled laboratory environment . Results derived from testing fi eld-applied samples may vary, dependent on actual site conditions.
Technical Support
- Fosroc off ers a comprehensive technical support service to specifi ers, end users and contractors. It is also able to off er on-site technical assistance, an AutoCAD facility and dedicated specifi cation assistance in locations all over the world.
New Concrete Substrate:
- Ensure the surfaces are prewetted and remove the excess water.
Existing Concrete/Screed Substrates:
- Remove all loose or hollow portions and make good with a polymer modifi ed mortars from Renderoc Range.
Tile Substrates:
- Check that existing fi nish is fi rmly adhering to the base. Remove any loose or hollow sounding tiles and reprofi le with polymer modifi ed mortars from Renderoc Range.
Mixing
- Nitotile MPA should be mixed with clear potable water in the ratio 0.26 to 0.30. A slow speed drill fi tted with a mixing paddle is recommended for mixing. Add powder to water and mix until a uniform, lump-free consistency is achieved. The total quantity of water may be slightly adjusted to achieve the required consistency.
Application:
- Make sure that required amount of adhesive shall be mixed & used within the specifi ed pot life. Spread not more than the area which can be tiled within the open time of the adhesive.
- Using a notch trowel, uniformly comb the tile adhesive to required thickness.
- Firmly fix the tiles into position with a slight twisting action, ensuring good contact without leaving any voids behind tiles.
- Tiles should be fi xed within specifi ed open time of adhesive, depending on the porosity of the substrate and atmospheric conditions. Adhesive ribs can be checked periodically and if a skin has formed, remove the adhesive and apply a new layer.
- Spacers & corner beads of required dimensions shall be used to maintain adequate joints between individual tiles on horizontal or vertical areas.
Get Best QuoteRequest A Callback
Fosguard Granite And Marble Tile Adhesive
Product Price: Rs 615 / PieceGet Best Price
Minimum Order Quantity: 2 Piece
Product Brochure
Product Details:
| Packaging Size | 20 Kg |
| Model Number | Nitotile GTA |
| Packaging Type | Bag |
| Surface Of Application | Tiles |
| Form | Powder |
| Grade Standard | Chemical |
| Strength | High |
| Bed Thickness | 12 mm |
| Dry Condition Tensile Adhesion Strength | 1.5 mpa |
| Product Brand | Fosguard |
| W/P Ratio | 0.30 |
| Adjustability | 15 min |
| Pot Life | 120 min |
| Mixed Density | 1.90 Gm/cc |
- Granite Tile
- Nitotile GTA is a single part high quality polymer based adhesive for the permanent fixing of granite granite,marble & stone tiles
Advantages
- High bond strength.
- Quick fixing.
- Good grab for heavy duty stone cladding.
- Conforms to IS 15477 Type III.
- High adhesive bond strength - Ideal for vertical and horizontal applications of granite, marble, etc.
- Excellent grab during open time
- Smooth easy to mix and spread
- Can be used in the interior and exterior of buildings
- Prepacked product requiring only direct mixing water at site.
- Granite and Marble Tile Adhesive
- Fixing granite, marble and stone tiles for both interior and exterior applications
Note:
- The typical physical properties given above are derived from testing in a controlled laboratory environment . Results derived from testing fi eld-applied samples may vary, dependent on actual site conditions.
Surface Preparation:
- All surfaces must be sound and thoroughly cleaned beforeNitotile GTA is applied. All traces of grease and oil must be removed. All loose particles of mortar, wallpaper, paint etc., must be physically removed. The prepared surface must be wetted with water, prior to application of Nitotile GTA and must attain a saturated surface dry condition.
- Nitotile GTA can be applied directly on concrete, cement screeds, cement or lime mortars, provided they are strong.
- Make sure the substrate is fl at and in sound conditions to achieve uniform thickness & coverage.
- Saturate the surface thoroughly and remove excess water before the application of Nitotile GTA For porous substrates, it is recommended to use suitable primer.
Mixing:
- Nitotile GTA should be mixed with clear potable water in the water powder ratio of 0.26 to 0.30. A slow speed drill fi tted with a mixing paddle is recommended for mixing. Add powder to water and mix until a uniform, lump-free consistency is achieved. The total quantity of water may be slightly adjusted to achieve the required consistency
Application:
- Make sure that required amount of adhesive shall be mixed & used within the specifi ed pot life. Spread not more than the area which can be tiled within the open time of the adhesive.
- Using a notch trowel, uniformly comb the tile adhesive to required thickness.
- Firmly fi x the tiles into position with a slight twisting action, ensuring good contact without leaving any voids behind tiles.
- Tiles should be fi xed within specifi ed open time of adhesive, depending on the porosity of the substrate and atmospheric conditions. Adhesive ribs can be checked periodically and if a skin has formed, remove the adhesive and apply a new layer.
- Spacers & corner beads of required dimensions shall be used to maintain adequate joints between individual tiles on horizontal or vertical areas.
- move any excess adhesive from the tiles and joints with a damp sponge or cloth before it sets. Leave for at least one day before application of tile grouts. It is recommended to use Nitotile cementitious/epoxy tile grouts.
Limitations:
- Nitotile GTA is not recommended for overhead applications. On vertical applications, heavy slabs need proper support till appropriate grab is achieved
- Nitotile GTA should not be applied on Gypsum board substrates. Any height more than 3 mt needs clamping.
Health and Safety:
- Nitotile GTA contains cement powders which, when mixed with water or upon becoming damp, release alkalis which can be harmful to the skin. Hence,use hand gloves of type Butyl Rubber and vinyl.
Get Best QuoteRequest A Callback
Fosgaurd Nitotile GPX High Performance Tile Adhesives
Product Price: Rs 450 / BagGet Best Price
Minimum Order Quantity: 100 Bag
Product Brochure
Product Details:
| Packaging Size | 20 Kg |
| Packaging Type | Bag |
| Surface Of Application | Tiles |
| Grade Standard | Chemical |
| Strength | High |
| Material Compatibility | Ceramic |
| Open Time | 10 min |
| Shelf Life | 1 Year |
| Product Brand | Fosguard |
| Country of Origin | Made in India |
Get Best QuoteRequest A Callback
Fosguard Nitotile GP Floor Tile Adhesive
Product Price: Rs 360 / BagGet Best Price
Minimum Order Quantity: 20 Bag
Product Brochure
Product Details:
| Packaging Size | 20 Kg |
| Packaging Type | Bag |
| Surface Of Application | Tiles |
| Form | Powder |
| Grade Standard | Chemical |
| Strength | High |
| Open Time | 10 min |
| Curing Time | Self Curing |
| Shelf Life | 1 Year |
| Product Brand | Fosguard |
| Pot Life | 60 min |
| Shear Adhesion Strength | 1.0 N/mm2 |
| Tensile Adhesion Strength | 0.5 N/mm2 |
| Mixed Density | 1.90 gm/cc |
| Country of Origin | Made in India |
Get Best QuoteRequest A Callback
MYK Laticrete 325 Tile Adhesive
Product Price: Rs 740 / BagGet Best Price
Minimum Order Quantity: 50 Bag
Product Brochure
Product Details:
| Packaging Size | 20 Kg |
| Model Number | 325 |
| Packaging Type | Bag |
| Surface Of Application | Tiles |
| Grade Standard | Chemical |
| Strength | High |
| Material Compatibility | Ceramic |
| Chemical Resistance | Screed |
| Product Brand | MYK Laticrete |
Get Best QuoteRequest A Callback
MYK Laticrete 335 Tile Adhesive
Product Price: Rs 870 / BagGet Best Price
Product Brochure
Product Details:
| Packaging Size | 20 Kg |
| Model Number | 335 |
| Packaging Type | Bag |
| Grade Standard | Industrial |
| Material Compatibility | Ceramic |
| Chemical Resistance | Screed |
| Product Brand | MYK Laticrete |
Get Best QuoteRequest A Callback
MYK Laticrete 307 Tile Adhesive
Product Price: Rs 380 / BagGet Best Price
Minimum Order Quantity: 20 Bag
Product Brochure
Product Details:
| Packaging Size | 20 Kg |
| Brand | MYK Laticrete |
| Model Number | 307 |
| Packaging Type | Bag |
| Form | Powder |
| Strength | High |
| Material Compatibility | Ceramic |
| Chemical Resistance | Screed |
Get Best QuoteRequest A Callback
MYK Laticrete 305 Tile Adhesive
Product Price: Rs 240 / BagGet Best Price
Minimum Order Quantity: 20 Bag
Product Brochure
Product Details:
| Packaging Size | 20 Kg |
| Model Number | 305 |
| Packaging Type | Bag |
| Surface Of Application | Tiles |
| Grade Standard | Economy |
| Strength | High |
| Material Compatibility | Ceramic |
| Chemical Resistance | Screed |
| Usage/Application | Fixing Tiles |
| Product Brand | MYK Laticrete |
Get Best QuoteRequest A Callback
Fosguard Floor Tile Adhesive
Product Price: Rs 375 / BagGet Best Price
Minimum Order Quantity: 20 Bag
Product Brochure
Product Details:
| Packaging Size | 30 Kg |
| Usage/Application | Fixing Tiles |
| Model Number | Nitotile FTA |
| Packaging Type | Bag |
| Category | Acrylic Based Polymer Coating |
| Coverage | 150 Square Feet |
| Type | Floor Tile Adhesive |
| Surface Of Application | Tiles |
| Grade Standard | Chemical |
| Strength | High |
| Material Compatibility | Ceramic |
| Fixture Time | 45 Minutes |
| Product Brand | Fosguard |
Get Best QuoteRequest A Callback
Kerakoll BiotileTiles Adhesive
Get Latest Price
Product Details:
| Model Number | Kerakoll biotile |
| Packaging Type | Bag |
Get Best QuoteRequest A Callback
Wall Tiles Adhesive
Product Price: Rs 380 / BagGet Best Price
Wall tiles adhesive
Get Best QuoteRequest A Callback
Kerakoll Bioflex Tile Adhesives
Get Latest Price
Get Best QuoteRequest A Callback